is a custom transfer okay? ie gci having the double sided transfer track or mack family coasters/big one with the elevator station
does a transfer/storage count if it is functional or if it is representative of a custom transfer that, if possible in nl2, would be functional?
that would be amazing
So I've seen some Gerstlauer Family Coaster Trains, found on Dragonfly (Duinrell)! So does anyone have these trains? Thx in advance...
Hint #2 Added
Hint #3 Added
@UncleArly send me your Packagefile to my email adress : [email protected]
I set them to that but it either just stops for the wait time and then moves through, or doesn’t stop at all and carries on. It does not drop.
No problem send me your Packagefile : [email protected]
Back to square 1 :( Happening again! Mind if i package the park up and see if you can take a look at anything strikingly obvious? :(
Try loading up Jamp Up Land.
Hey :) Just a quick question regarding video recording, freezing / loading parks etc. I currently have the setup below for running NL2, which takes about 20-22 seconds to load the included Forest Mountain Park. Not sure exactly which components affect loading times in NL2, although I do know that the SSD affects it to some extent. But I'm not sure how much other things affect loading times. Would installing NL2 on a faster SSD improve my loading / recording times or am I already bottlenecked by other parts of my setup (eg CPU)? Thanks in advance :D
Intel i5-9300h
Nvidia RTX 2060 (Mobile)
16GB 2666MHz DDR4 dual-channel RAM
Here are my SSD's read/write speeds from CrystalDiskMark:
Ok tnx and very happy for u found the problem.
Case closed.
Hi Guys,
Wondering peoples thoughts on potentially having the operator panel on an iPad to control a coaster? Might start developing it and looking into it if people think it'd be a good idea?
Ive solved the problem.
Using the TV Screens that come with NL2 I wanted to create a entry system to the park using arrows (green arrows facing down to tell guests where to queue). I did this via converting a JPEG to OGV file then displaying them on the TV Screens side by side. So I had 5 TV screens side by side WITHOUT THE MUTE AUDIO option selected. Even though there was no audio on the OGV files, I presume all the other sounds from the park would effect the "area" of the audio of the TV's. I selected mute audio on all the TV's and the problem went!
Hope that makes sense?
Thanks for all your help by the way really apprecaite it :)
Can u explain this line of text :
Its only happening in the park in question
Maybe u can send me your parkpackage file to my email adress
Yes it does come with a 7 car train. Im unsure where the original train went so i used an alpeingeist statix that had only 6 cars on it with the wheels swapped. Its worked for several years with no problem until i lost the last car.
A train with a length of 6 cars should still be able to complete the course. This leads me to think that there may be something wrong with your track layout? Have you checked if there's a spot where one of the rails has become disconnected from a cross tie? Have you tried to fully disassemble your trail to properly clean it? Another possible issue is that maybe your train is colliding with a support or something, causing is to lose a lot of speed. Since each car doesn't weigh much at all, the extra weight of a single car would not make much of a difference. Also, doesn't the scorpion kit come with a 7 car train?
Its only happening in the park in question. Every other custom made park / NL Default park is fine.
There must be something specific wrong with the park but I have no idea where to start?
Do you have any advice what MAY be causing the issues as we've ruled out hardware issues?
So then any of the preset frictions is ok?
We upped the max length to 700 m (~2296 ft). Still short, but should give you more wiggle room. 🙂
RedLimitsCoasters posted on April 16th, 2020
Are inversions allowed on the family coaster?
There are no rules specifying this, so yes.
ItsAmaliaB posted on April 16th, 2020
isnt 00:00 saturday to 00:00 sunday 24 hours or am i just stupid
You must have misread - the post says 23:59 Sunday, so 48 hours. 🙂
Jetcoasterfan posted on April 16th, 2020
So what about custom friction? How about 0 friction and 0 air resistance?
Nope. That brings up a good point, so I'll add it to the FAQ.
Is it every park u load in the NL2 program ?
What detail settings do u have ?
I have this :
