coucou mes petits coasters. j'ai une surprise pour vous. regardez plutôt. et téléchargez aussi si ça vous intéresse.
Nolimits Central : https://nolimitscentral.com/exchange/parks/7822
Steam : https://steamcommunity.com/sharedfiles/filedetails/?id=3820216883
CCA_Games posted on September 7th, 2026
EK gaming posted on September 6th, 2026
CCA_Games posted on September 5th, 2026
EK gaming posted on September 5th, 2026
CCA_Games posted on September 5th, 2026
I think all you need to do is on the previous block in the settings where it says next block segment set it to swing brake. Then set the swing launch on the next block. As long as the block doesn't go immediently into a switch track after or transfer track then it should pass through normally but swing launch when stopped.
Is there any way you can make a quick tutorial on just that part? your tutorial isn't super helpful because your making a swing launch at the same time. It would be VERY VERY helpful!
Maybe, but probably not till monday or Tuesday or next week
ok thank you so much!! just lmk when you post it!
thank you so much! this was very helpful!!
EK gaming posted on September 6th, 2026
CCA_Games posted on September 5th, 2026
EK gaming posted on September 5th, 2026
CCA_Games posted on September 5th, 2026
I think all you need to do is on the previous block in the settings where it says next block segment set it to swing brake. Then set the swing launch on the next block. As long as the block doesn't go immediently into a switch track after or transfer track then it should pass through normally but swing launch when stopped.
Is there any way you can make a quick tutorial on just that part? your tutorial isn't super helpful because your making a swing launch at the same time. It would be VERY VERY helpful!
Maybe, but probably not till monday or Tuesday or next week
ok thank you so much!! just lmk when you post it!
CCA_Games posted on September 5th, 2026
EK gaming posted on September 5th, 2026
CCA_Games posted on September 5th, 2026
I think all you need to do is on the previous block in the settings where it says next block segment set it to swing brake. Then set the swing launch on the next block. As long as the block doesn't go immediently into a switch track after or transfer track then it should pass through normally but swing launch when stopped.
Is there any way you can make a quick tutorial on just that part? your tutorial isn't super helpful because your making a swing launch at the same time. It would be VERY VERY helpful!
Maybe, but probably not till monday or Tuesday or next week
ok thank you so much!! just lmk when you post it!
EK gaming posted on September 5th, 2026
CCA_Games posted on September 5th, 2026
I think all you need to do is on the previous block in the settings where it says next block segment set it to swing brake. Then set the swing launch on the next block. As long as the block doesn't go immediently into a switch track after or transfer track then it should pass through normally but swing launch when stopped.
Is there any way you can make a quick tutorial on just that part? your tutorial isn't super helpful because your making a swing launch at the same time. It would be VERY VERY helpful!
Maybe, but probably not till monday or Tuesday or next week
CCA_Games posted on September 5th, 2026
I think all you need to do is on the previous block in the settings where it says next block segment set it to swing brake. Then set the swing launch on the next block. As long as the block doesn't go immediently into a switch track after or transfer track then it should pass through normally but swing launch when stopped.
Is there any way you can make a quick tutorial on just that part? your tutorial isn't super helpful because your making a swing launch at the same time. It would be VERY VERY helpful!
I think all you need to do is on the previous block in the settings where it says next block segment set it to swing brake. Then set the swing launch on the next block. As long as the block doesn't go immediently into a switch track after or transfer track then it should pass through normally but swing launch when stopped.
Hi! I've learned the basics of how to use this program, so I'm trying to do more advanced stuff. for example, I have a coaster on which on the second launch I would like it to fully stop, launch backwards, up the last element, then back forewords through the rest of the layout ONLY when I Emergency stop the train on the launch, so basically just a basic launch recovery. If there is anyone able to give me the steps to do that, it would be greatly appreciated. Thank you!
salut dg.
alors j'ai téléchargé la derniére version du logiciel , je suis content qu'il y ait une nouvelle version d'ailleurs. le truc c'est que j'ai pas trés bien compris les nouveautés qu'il y a dans cette version 1.4.x et les boutons "help" ne m'ont pas aidé, est ce que ça te dérangerais de me faire un topic de toutes les fonctions nouvelles et changées avec leur description , s'il te plaît ?
merci d'avance.
Hello!
Is there a native Linux version of this tool available? It works great on Windows, however, I have been unable to get it working properly under Wine.
Thank you!
U write :
".. you have forgotten to also copy the folder "dgScriptGenerator" that is generated right next to the script. .."
No i didn't forget to copy that to.
".. Additionally, I see you haven't set up any exit for any block in your script. For the script to actually do something, you need to tell each block which other blocks the train can go to from there. Make sure to click in the settings button (the three lines with the small circles) on each block and set up the exits list and set up each exit on their own settings button (you need to let it know if you want it to be a forwards or backwards exit, if the train should be launched or not, if it will pass any switches when moving from this block to that next one or if you want to enable any other special function from the generator). Make sure to check each function's help on their own question mark button to know exactly how they are supposed to be used... .."
I have to look into that.
Tnx for your precious time to hopefully solve this problem.
Kind regards,
MrRC
MrRC posted on July 19th, 2026
There is much more below this.
Yes, but with those first lines it's enough to load your configuration to the program and generate the script again, and that way you don't need to send that many characters. Big scripts can hit NLC's limit on their own...
So, I think I know what your main issue is, but I also found a second one in your script...
The error you have is most likely that when moving the script from one computer to the other, you have forgotten to also copy the folder "dgScriptGenerator" that is generated right next to the script. This folder contains additional scripts and functions that the main script needs to work correctly. You need to copy it with your script and place them both in your park for the script to work in NL2.
What I don't understand is why the error in NL2 is so undescriptive in that case, but at least now I know what that means...
Additionally, I see you haven't set up any exit for any block in your script. For the script to actually do something, you need to tell each block which other blocks the train can go to from there. Make sure to click in the settings button (the three lines with the small circles) on each block and set up the exits list and set up each exit on their own settings button (you need to let it know if you want it to be a forwards or backwards exit, if the train should be launched or not, if it will pass any switches when moving from this block to that next one or if you want to enable any other special function from the generator). Make sure to check each function's help on their own question mark button to know exactly how they are supposed to be used...
I hope this will do for u :
/*
{
"coaster" : {
"name" : "DoorCoaster",
"brakeBehav" : "Auto",
"visuallyLinkedCoasters" : [
]
},
"switches" : [
{
"name" : "Lift_1",
"type" : "Transfer",
"skipPositions" : [
]
}
],
"sections" : [
],
"blocks" : [
{
"name" : "Station",
"type" : "Station",
"offlineBehav" : "Connected",
"stationPasses" : 0,
"idleLiftSpeed" : "Crawl",
"brakeBehav" : "Default",
"linkedSections" : [
],
"exits" : [
]
},
{
"name" : "Brake_1",
"type" : "Brake",
"offlineBehav" : "Connected",
"stationPasses" : 0,
"idleLiftSpeed" : "Crawl",
"brakeBehav" : "Default",
"linkedSections" : [
],
"exits" : [
]
},
{
"name" : "Lift_Brake",
"type" : "Brake",
"offlineBehav" : "Connected",
"stationPasses" : 0,
"idleLiftSpeed" : "Crawl",
"brakeBehav" : "Default",
"linkedSections" : [
],
"exits" : [
]
},
{
"name" : "EM_Brake",
"type" : "Brake",
"offlineBehav" : "Connected",
"stationPasses" : 0,
"idleLiftSpeed" : "Crawl",
"brakeBehav" : "Default",
"linkedSections" : [
],
"exits" : [
]
},
{
"name" : "Final_Brake",
"type" : "Brake",
"offlineBehav" : "Connected",
"stationPasses" : 0,
"idleLiftSpeed" : "Crawl",
"brakeBehav" : "Default",
"linkedSections" : [
],
"exits" : [
]
}
]
}
*/
There is much more below this.
Kind regards,
MrRC
MrRC posted on July 18th, 2026
[...]
Error in File 'DoorCoaster.nlvm' in Line 89: Not a package: ?s
...1 error(s), 0 warning(s)Maybe u can help me out here.
[...]
Hi. Unfortunately, I'm going to need to see your script to help you. Can you copy-paste here the first lines of the generated script? I need all the lines between the one that says "//Version = X.X.X" and the one that is exactly " */", just before the one that says "import com.nolimitscoaster.*;".
If you can send those lines I can recreate your script and reproduce the error myself to see how to fix it both in your case and potentially permanently in the generator. :D
Hi DG,
I started today to work with your program.
I made a simple coaster with a transfer as a lift.
I followed the instructions and got a script made by your program, but i got some error messages :
Error in File 'DoorCoaster.nlvm' in Line 89: Not a package: ?s
...1 error(s), 0 warning(s)
Press H for Quick Help
Waiting for scripts to finish...
Fly View
Maybe u can help me out here.
System Win XP 32 bits
I do run your program on a laptop with 64 bits Win11 25H2 26200.8875
And export it by USB stick to my WinXP 32 bits (the whole directory)
**EDIT :
I did copy the whole map of the park to the laptop and get the same results.
**
elshlagos posted on June 27th, 2026
Hello ! Is it possible to add a track trigger to move a switch track back to its initial position, I had a to put a mini block and use it as a trigger to move the switch track fast enough to take the next train.
Have a good day!
Hi!
It is now, I had actually added a couple more stuff in the scripts that made it easier to do just what you want to do, so I've dropped a new sample script in the last update of the generator which you can check out.
It's called "ClearSwitchOnTrigger" and in this case, it's a plug and play extension sample. You just need to copy it to your park and assign it to your coaster below its own Block System Controller script. Then, create triggers with the name of your switch followed by "_clear" (skip the quotes) and it should work.
I could add this functionality straight into the generator, but I don't think I want to, because it's really easy to provoke an unsafe situation where a train may roll towards an incorrectly cleared switch, so I'll leave it as an extension script for those of you that still want to do it and kinda know what you're doing with it, but I won't add it as a function on the generator at least for the time being.
Let me know if you need more help.
There were a few bugs in the previous release which I have fixed in this update.
The list of changes is:
As always, the download link is updated in the first post.
Hello ! Is it possible to add a track trigger to move a switch track back to its initial position, I had a to put a mini block and use it as a trigger to move the switch track fast enough to take the next train.
Have a good day!
A new update is here with some of the last big features I had originally planned for the generator. I still have a few things I'd like to add, but they all require a bit of study to work. I feel like this is the right time to ask: do you miss any feature on the program? Let me know if you do!
The changes on this version are:
As always, the download link is updated in the first post.
SentinelParks posted on May 18th, 2026
Hello ThatFlyerGuy1, how did you go about this?
Hi, sorry it's taken me so long to get back to you.
What I did was I set my lift speed to the maximum desired speed. In areas where I wanted it to run slower, I used getLiftCurrentSpeed() and toggled rapidly between idle and forward when the lift was above or below the desired speed respectively. This eliminates the rather annoying flickering in the sections panel when the ride is running in automatic. I can't tell you how to define your sections, that is up to you.
The sounds are simple and are just driven off of mathematical functions related to the returned speed value.
